Application: | Drone |
---|---|
Signal Transmission: | Radar |
Type: | Button |
Certification: | ISO9001, RoHS, FCC, CE |
Universal: | Universal |
Transmission Distance: | >100m |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
How to match code with transmitter:
1. Put the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R12DS.
3. Connect CH3 of R12DS to ESC.
4. There is a black button on the R12DS, use a thin stick press the button twice in two seconds, receiver light starts blinking, after about blinking 8 times, match code success and receiver signal LED always on!
Specification:
1) Channels: 12 channels:output12channels signal, supportS-BUS and PWM signaloutputsynchronously.
2) Working voltage: 4.8-10V
3) Working current: 38-45mA input voltage: 5V
4) Size: 50*31.5*14.5 MM
5) Weight: 14g
6) Receiver integrate telemetry sensor including signal strength and voltage. Support extended engine voltage telemetry module PRM-01 and module PRM-02 can feedback GPS info, Speed, voltage etc. on AT9/AT9S/AT10/AT10II display when work with flight controller APM or PIX.
7) 4096 section precision, 0.25us per section, servo anti-shake rudder.
8) Control distance: about 4 kilometers air(Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations).
Installment of receiver antenna
1. The antenna must be kept as straight as possible. Otherwise it will reduce the effective range.
2. Large model aircraft may has some metal part interfering signal; in this case the antennas should be placedat both sides of the model. Then the best RF signal condition is obtained at any flying attitude.
3. The antennas must be keptaway fromconductive materials,such as metal and carbon. at least a half inch. The coaxial part of the antennas does not need to follow these guidelines, but do not bend it in a small radius. 4. Keep the antennas away from the motor, ESC, and other noise sources as far as possible.
5. Press and hold the Easy Link (ID SET) one second, then the receiver starts work.
6. After all of the above steps were finished, the LED indicator will turn and keep in red.
7. The receiver can be packed by sponge or foam for shockproof when it is installed to the model.
After all of the above steps were finished, turn off the transmitter and then power it on, now the program functions to assure it under control of transmitter with a right connection.
Established in 2008, Dongying Tianqi Industry Trade Co., Ltd. is a professional manufacturer and exporter that is concerned with kinds of stainless steel investment castings . We are located in Dongying, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Q:What is the Minimum Order Quantity(MOQ)?
A:One piece is acceptable, but the customers have to pay the sample cost and the courier cost
Q:How will you deliver my goods to me?
A:Normally, we will ship the goods by air, by sea and by express.
Q:Can you print my own logo on the products?
A: Yes, of course. Not only the logo, but also the packing design and other OEM services are available.
Q:What is your product quality?
A: Our raw materials are all purchased from qualified suppliers. And we have very strict QC standard to assure our final products meet your requirements.
Q. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q:What is your warranty?
A:Our warranty is 12 months after you received the goods. We will pay high attention to after-sales service.
Q: What method do you support to make payment?
A: We support many ways, including Western union , MomenyGram or TT.
Q: Are you a manufacturer?
A: Yes, we are a manufacturer, both OEM and ODM. We have our own development team, sales team, and factory.
Suppliers with verified business licenses